MSW Bench Drill - 550 W - 5 power levels MSW-TBBD-1500AT

Do you want to cut vertically and precisely into wood, chipboard, MDF, metal, plastic and drill other materials? Then the pillar drilling machine with its quiet and powerful 550 W motor is the appliance of choice! With the comfortably equipped bench drill, you can achieve clean and high-quality drilling results with millimetre precision for a wide range of requirements in wood and metal workshops. This will give you access to several individual setting options. First of all, there are the five drilling speeds with which you can set the speed between 510 and 2850 rpm. This way, you can adjust the power of the bench drill press specifically to the material and your desired end result. Another practical and dimensionally accurate presetting is the variable position of the drilling table. Not only can you adjust the height of the work surface, but also select an angle between -45° and 45° on the column. This way, the work piece rests at an angle and is secure, while the drill perpendicularly penetrates the material. Evenly regulate the drilling depth up to 50 mm with a three-arm spindle and gear drive. You can use the power tool for an wide range of drill bits: the drill chuck with a B16 taper holds thicknesses between 1.5 and 13 mm, so you can handle all common drill holes with confidence. The drilling area is illuminated with the help of an LED light. To ensure that you can set the drill hole precisely, a laser pointer also marks the point to which you want to guide the drill. The solid cast-iron base enables you to work without jolting. ...