Stamos Welding Group Welding Wire - set of 3 - steel - ER70S-4 - 1.0 mm - 3 x 5 kg S-WMW-ER70S-4 1.0-5.0KG-SET-2

Want to weld unalloyed steels with your MIG/MAG welder? Then use high-quality steel alloy welding wire from the Stamos Welding Group! With the steel welding wire you can achieve optimum results with structural steels and other unalloyed steels. The MIG wire for unalloyed steels has a diameter of 1.0 mm. Make sure it matches your wire feed in the MIG/MAG welder. For shielding gas, use active mixed gases from the M2 or M3 group with a high proportion of Argon or C1 for non-alloyed steels. Due to its balanced chemical composition of C, Si and Mn, you can achieve optimal welds with a high tensile strength. The MIG welding wire showcases high arc stability and a low spatter formation, so that you can easily achieve high-quality weld seams. Achieve exceptional efficiency in welding, even during longer tasks, thanks to the provided quantity of 3 x 5 kg. The MIG/MAG welding wire is perfectly suited for work on construction sites, in shipbuilding, or on pressure vessels made of non-alloyed steel or fine-grain carbon-manganese steels. ...