Stamos Soldering Electronic load - LCD - 500 W - 0 - 40 A - programmable S-LS-118

The Stamos Soldering Electronic Load provides reliable measurement results in both simple and complex applications. Use it in quality assurance as well as in product development or product safety. As a PC interface, the unit has connections for USB, RS232, GPIB and LAN. The Electronic Load provides a high-precision DC power supply with precise resolution, where you have access to the four working modes CV / CC / CR / CP. You control the unit via a clearly laid out control panel, which is equipped with a rotary control for precise adjustment of both voltage and current. The graphic LCD display also shows this as a waveform. You can save the waveform data via a U-Disk connection. In addition, you have up to 100 memory locations at your disposal. The clearly legible LCD display shows the values for current and voltage with an accuracy of 0.1 mA and 0.1 mV respectively. The voltage can be set within a range of 0 - 150 V, and the current can be regulated between 0 - 40 A. Thanks to 100 programmable memory locations, operation is extremely convenient. For precise control, set the load according to a constant voltage (CV), constant current (CC), constant load resistance (CR) or constant power (CP). It is used for automatic tests, for testing batteries or solar panels as well as for OPP and OCP tests. In addition, the unit offers functions for short-circuit analysis, current monitoring, switch-off memory and remote interrogation. . The DC electrical load is protected against excessive power, temperature, voltage and current. So you always use it safely in daily operation and fully exploit the power of 500 W even in dynamic mode up to 10 kHz. ...