MSW Plastering Machine - 20 bar - 40 litres - 15 l/min - 2200 W MSW-PU-20

Mix first, then spray: with the MSW plastering machine, applying water-based plaster made from gypsum, lime, or cement to the wall is a breeze. The rotor in the plastering device ensures the flawless consistency of your plaster, which you apply to the wall with a working pressure of up to 20 bar. This ensures that the mortar adheres to the wall, forming a uniform layer that only requires smoothing! The plastering machine is extremely easy to use and offers you maximum freedom of movement. Connect it to your compressor and regulate the incoming pressure with the air pressure reducer. Control the rotation direction and speed of the rotor on user-friendly control panel, adjusting them according to the dry material and water mixing ratio you use for plastering. The device achieves the best results with a granulation of up to 6 mm. With a length of 7.5 meters, the mortar hose allows you to comfortably manoeuvre the spray gun during application. Select a suitable nozzle depending on the mortar mixture. The container for your plaster has a capacity of 40 l. This allows you to work on large areas with the plastering machine without excessive interruptions, achieving a delivery rate of 15 l per minute The container's lid enhances cleanliness while working. Transporting the plastering machine to the job site is made convenient by 2 wheels. The machine's compact size makes it perfectly suited for use on a construction scaffold, enabling you to reach higher wall surfaces with ease. After completing the work, you clean the device with water and the supplied cleaning balls in just a few simple steps. ...