Steinberg Systems Electric Hoist - 1050 W - 600 kg - 18 m SBS-EH-600/18

The electric hoist SBS-EH-600/18 from Steinberg Systems is ideal for lifting heavy loads in the warehouse and workshop. With its 18 m steel cable, the electric hoist has a load capacity of 300 kg which can be increased to 600 kg by using the included pulley. The wire rope hoist is specially designed for indoor use and can be mounted on the wall, a scaffolding pole, or on a swivel arm. The cable hoist has a 1050 W motor that enables it to lift heavy loads up to 300 kg to a height of up to 18 m. With the electric wire rope hoist, work in the workshop and warehouse can be done in no time at all. With a hoisting speed of 8 m/min, you are always one step ahead. The solid steel cable is twist-resistant, low-wear and particularly durable. When the pulley is inserted, the lifting height is halved to 6 m and the lifting speed to 4 m/min. At the same time, the load on the hoist increases to 600 kg and allows heavy loads to be lifted. This means that the cable hoist has a doubled load capacity when you are using the pulley. The cable pull can be controlled at the touch of a button via the wired remote control. If it becomes dangerous, the emergency switch on the remote control can be pressed and the hoist stops. The hooks are each equipped with a safety catch. The unit switches off automatically at both the highest and lowest positions. The steel housing is extremely resistant and thus reduces the risk of wear marks such as scratches, chipping and corrosion. The cable hoist is rated with protection class IP54 and is protected against dirt or water; the unit also has thermal overload protection. ...